1, excessive bending torch cable, wire will cause poor, should be extended to use.
2, loading and unloading guide wire spring to keep straight into the straight, to prevent the wire spring lead to permanent bending deformation, increase the resistance of wire.
3, the welding process, the most likely to damage the splash welding torch and affect the 通过lity of welding. To avoid poor wire feed, arc instability and reduce the 燃气s protection effect, please promptly remove the nozzle and the nozzle on the spatter.
4, in the nozzle is not timely clean-up and accumulation of excessive splash and even cause short-circuit inside the torch and burn torch parts.
5, in order to minimize the splash, please use anti-splash or anti-splash paste. Clean the splash Do not use hard objects percussion, so as not to damage the gun.
6, the torch is strictly prohibited as knock, hit the workpiece tool.
7, is strictly prohibited as a cable drag other heavy objects (such as wire feeder) tools.
8, the welding process is completed, should clean up the torch, properly kept for the next use.
9, If the torch is deactivated for more than one week, all the welding wire must be taken out from the welding torch to prevent the rust from increasing the resistance inside the guide wire spring.
10, the following environmental conditions require the use of exter称l protective measures Conditions:
A) An increased risk of electric shock.
B) the environment with flammable materials
C) Aerial work
D) An airflow environment
E) a noisy environment
F) Sealed container environment